1997: Yige Company was formally established.
2001: Introduced European technology to develop the first hot chamber die casting machine of the EG brand.
2002: The EG brand's first beam-reinforced and hot-shell die-casting machine with Mitsubishi draw-type is delivered to customers.Inthe same year, senior mechanical engineers were hired to carry out R&D and design of the cold chamber die casting machine.
2003: EG brand's first generation of floating pistons and 160T, 280T cold chamber die casting machines equipped with Mitsubishi draw type, deliveredto customers.
2004: The first generation of floating pistons of the EG brand and the cold chamber die casting machines of the 160T~1000T tonnage with the Mitsubishi draw type are all available. In the same year, EG brand hot room, cold room two series of die casting machine pass
Through the quality inspection of national casting forging machinery. The annual sales volume of die casting machines has exceeded 100 units.
2005: The annual sales volume of EG die casting machine exceeded 200 units.
2006: The second generation EG cold chamber die casting machine: the front pressurized split type oil circuit board and the combined pressurized piston type die casting machine are delivered to the customer.
2007: The third generation EG cold chamber die casting machine: the front supercharged improved one (full) body pressurized piston machine, which is mass produced and put on the market. In the same year, it was located in the self-owned factory of Dajiang Community, Wanjiang, Dongguan City.
The dormitory was completed and the whole relocation was carried out to the new site.
2008: The fourth generation EG cold chamber die-casting machine: the front-loading integrated oil-filling circuit board + integrated booster piston + configuration Omron industrial computer and other new models, put into the market and won praise from customers.
2009: The fifth generation EG cold chamber die casting machine: the reinforced machine hinged mold base system, put on the market. In the same year, the company opened up overseas markets and exported its products to the Middle East and Africa.
2010: The sixth generation EG cold chamber die casting machine: express fast clamping system, put on the market.
2012: The company carries out refined production management and construction, with an annual sales and production of about 400 sets.
2014: The first R&D prototype product: CNC horizontal milling and boring machining center was completed.
2015: The second CNC horizontal milling and boring machining center was improved and optimized, and it was put into use within the company.
2016: The first generation of CNC horizontal milling and boring machining centers are delivered to customers in the market.
2017: The second generation CNC horizontal milling and boring machining center is delivered to customers in the market.
2018: The third-generation CNC horizontal milling and boring machining center was officially launched. In the same year, the R&D department set up a pentahedron CNC machining center and started research and development.
2019: The pentahedron CNC machining center (vertical/horizontal) is finalized.